The next guide shows the recommended equipments for carry out packages with shrink film according to the capacity of required production. It only is for informative function and not represent any equipment that we have for sale.

Most of the systems seal and cut the film with a hot wire or a hot knife that make contact on one heat resistant pad recovered with antistick material. Time, temperature and applied pressure affect the quality of the obtained seal. After the heating cycle is necessary a cooling cycle maintaining the pressure in order to solidify the seal. The dimensions of the equipment are accord the biggest product that need to pack.

n Manual l sealer (linear) and hot air gun, is necessary make first the bag and close it later; (2 or 3 pack per minute); total cost for 30 cm to 100 cm units: US $200 to $400.

930 Kb

n Manual L Sealer and hot air gun, make the bag and close it in one operation; (4 to 5 packs per minute); total cost for 25 cm x 25 cm to 100 cm x 80 cm units: US $600 to $3,000.

688 Kb

---

n Semi-automatic L Sealer and Shrink Tunnel, they generally have magnetic closings in order to control the pressure and the time of sealing saving this operation to the worker, they also have bands in order to evict the product toward the tunnel; (8 to 12 pack per minute); total cost per unit mixing machines of dimensions above mentioned: US $5,000 to $9,500.

---

n Automatic Feeder L Sealer and Shrink Tunnel, the worker only enter the products to pack; (20 to 95 pack per minute); total cost per unit: US $18,000 to $50,000.